How to Make Your Own Dog Mask – The Fundamentals
In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Make sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the surface of puppy dog mask your dog. Don’t make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are level and be sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll have to do some sanding to make sure that it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.